����ý

Monoprinting

Water-based ink is used for monoprints. A roller applies the ink evenly over a printing sheet. This is usually an acrylic sheet.

Monoprinting methods

There are two methods to create a monoprint.

Additive

Draw patterns, shapes and designs directly into an inked surface, usually an acrylic sheet. Gently lay a piece of paper on top of the inked surface to pick up the design.

Subtractive

Apply the paper, face down, directly to the inked acrylic surface and draw out the design on the back of the piece of paper. The pressure will lift ink from the acrylic sheet to leave an image.

Uses of monoprinting

It is used for single prints or small batches. Only a limited number of prints can be created this way as each print removes a layer of ink from the acrylic sheet.

Monoprints are usually limited to one colour. Try layering multiple monoprints on the same piece of fabric or paper.

• Always make sure the printing sheet is dry before applying water-based ink. If the sheet is wet the ink will water down and the print will not be ‘crisp’.
• If the monoprint is too dark and the detail isn’t visible, too much ink has been applied to the acrylic sheet. Blot off the ink using a piece of paper.
• The printed image will be a mirrored version of the plate, so write letters or words backwards when mark making.