If your satellite picture becomes frozen, pixellates or there is sound break up it is probably due to one of the following:听the dish has moved, the cable is damaged, something is in front of the dish, it is raining very hard, or there is snow in the dish.
If you find the problem is听the dish or cable, you should seek the advice of a qualified installer, or speak to your satellite provider,听 or .
Cables
Check all the cables between your TV equipment and satellite dish are connected securely. Try disconnecting and reconnecting the cables as this often works. While doing so, check none are听damaged or wet.
Reboot
Unplug your receiver from the mains and leave for 10 minutes. Turn it on again and see whether听the problem has gone.
Dish has moved
There can be problems even if the dish is听pointing only slightly in the wrong direction. Strong winds can cause this. The dish will need to be re-positioned听correctly.
Dish Installation
Check whether听the outside cable or connectors have any signs of damage, or whether they are loose or cracked as water can get into your aerial installation. Water will reduce the quality of the signal going through the cable and cause pixelation and loss of channels. See our help guide on cables and water ingress听听for further information
Obstructions
Anything in front of the dish, for example a tree, will weaken the satellite signal. Check whether听anything has appeared in front of the dish recently.
Heavy Rain
Very hard rain has the potential to stop or weaken the satellite signal.听Wait for the rain to stop and the problem should go away.
Snow听
If snow builds up in the satellite dish then this will stop or weaken the signal. If safe to do so, clear the dish of snow or wait until it thaws.
Works & Warnings
Check our听Works and Warnings page听to see if there any known technical problems.
Qualified Installer
We cannot recommend individual Installers. However the is a recognised trade body which will be able to put you in touch with one of their members in your area.
听